This is the preview version of the Wisconsin State Legislature site.
Please see http://docs.legis.wisconsin.gov for the production version.
NR 724.09 History History: Cr. Register, April, 1995, No. 472, eff. 5-1-95; CR 12-023: am. (8) Register October 2013 No. 694, eff. 11-1-13.
NR 724.11 NR 724.11Design plans and specifications. Unless otherwise directed by the department, responsible parties shall submit to the department design plans and specifications for each remedial action and any of the interim actions specified in s. NR 724.02 (1). Plans and specifications shall:
NR 724.11(1) (1) Be consistent with the concepts presented in the design report prepared under s. NR 724.09.
NR 724.11(2) (2) Provide a general correlation between drawings and technical specifications.
NR 724.11(3) (3) Include technical specifications and requirements necessary for all the components of the remedial or interim action.
NR 724.11(4) (4) Include detailed drawings of the proposed design, including general component arrangements, equipment layout, process flow diagram, piping and instrumentation diagrams, cross sections, sampling locations and instrumentation locations.
NR 724.11(5) (5) Show sufficient detail for construction, according to customary industrial and professional standards.
NR 724.11(6) (6) Unless otherwise directed by the department, include legible visual aids, including maps, plan sheets, drawings, isometrics, cross sections and aerial photographs, which:
NR 724.11(6)(a) (a) Are no larger than 24 inches by 36 inches and no smaller than 81/2 inches by 11 inches.
NR 724.11(6)(b) (b) Are of appropriate scale to show all required details in sufficient clarity.
NR 724.11(6)(c) (c) Are numbered, titled, have a legend of all symbols used, contain horizontal and vertical scales where applicable, and specify drafting or origination dates and current drawing revision or issue status.
NR 724.11(6)(d) (d) Use uniform, graphic scales.
NR 724.11(6)(e) (e) Contain a north arrow, where appropriate.
NR 724.11(6)(f) (f) Use national geodetic survey data as the basis for all elevations.
NR 724.11(6)(g) (g) Show dimensions for location and placement of features or units and elevations that are based on permanent, retrievable surveying control monuments or stations.
NR 724.11(6)(h) (h) Additionally, for solid or hazardous waste disposal facilities or, when directed by the department, for other land-based features being constructed at the site or facility as part of the response action:
NR 724.11(6)(h)1. 1. Display a survey grid based on monuments established in the field which are referenced to state plane coordinates.
NR 724.11(6)(h)2. 2. Show the survey grid location and reference major plan sheets on all cross sections.
NR 724.11 Note Note: Examples of land-based features include covers, waste or soil piles, soil treatment piles, liners, landfills and features created by earth moving and regrading.
NR 724.11(6)(h)3. 3. Include a reduced plan-view map on all sheets with cross sections indicating the location of the cross section.
NR 724.11(7) (7) Include descriptions, specifications and performance criteria necessary for procurement, construction and start up of all features and units, including key components and all instrumentation. Performance curves or criteria published by equipment suppliers or manufacturers may be utilized if they provide sufficient information.
NR 724.11 History History: Cr. Register, April, 1995, No. 472, eff. 5-1-95; CR 12-023: am. (6) (d) Register October 2013 No. 694, eff. 11-1-13.
NR 724.13 NR 724.13Operation and maintenance.
NR 724.13(1) (1)General.
NR 724.13(1)(a)(a) Unless otherwise directed by the department, responsible parties shall conduct all necessary operation and maintenance activities in accordance with this section and in compliance with all applicable state or federal public health and environmental laws, whichever are more stringent, until all applicable public health and environmental laws are complied with as required in chs. NR 700 to 754.
NR 724.13(1)(b) (b) Responsible parties shall operate and maintain any cover systems, liners, physical hydraulic containment systems, leachate collection systems, and gas collection, extraction, and management systems at sites or facilities for which they are responsible until no longer required by the department.
NR 724.13(1)(c) (c) Responsible parties and property owners shall operate vapor mitigation systems for which they are responsible until no longer required by the department.
NR 724.13(1)(d) (d) Vapor mitigation systems and remedial actions designed to address vapor migration shall be monitored at a frequency determined by the department, to measure whether the action taken has been effective in meeting the vapor action level.
NR 724.13(2) (2)Operation and maintenance plan. Unless otherwise directed by the department, responsible parties shall submit to the department an operation and maintenance plan when on–site maintenance activities are necessary to implement, monitor or ensure the effectiveness of a remedial or interim action. The plan shall outline all operation, monitoring, and maintenance activities, from design through case closure under ch. NR 726 or through post-closure under ch. NR 727, as appropriate, including all of the following information:
NR 724.13(2)(a) (a) The information specified under s. NR 724.05 (2) (e).
NR 724.13(2)(b) (b) A description of normal operation and maintenance, including a schedule showing the frequency of each operation and maintenance task.
NR 724.13(2)(c) (c) A contingency plan for any anticipated or potential operation and maintenance problems, including a description of techniques or activities to be conducted by the responsible parties to resolve operation and maintenance problems.
NR 724.13(2)(d) (d) A description of routine monitoring and analysis, including:
NR 724.13(2)(d)1. 1. Long-term monitoring required under s. NR 724.17;
NR 724.13(2)(d)2. 2. Laboratory or field tests, test methods and sampling methods; and
NR 724.13(2)(d)3. 3. A schedule of monitoring frequency and dates.
NR 724.13(2)(e) (e) A description of any site-specific or facility-specific record-keeping and reporting requirements to document operation and maintenance activities, including:
NR 724.13(2)(e)1. 1. Mechanisms for reporting system failures, discharges of hazardous substances, environmental pollution and other emergencies; and
NR 724.13(2)(e)2. 2. Reports to be submitted to the department, including the results of system and environmental monitoring and the results of the monitoring well inspections meeting the requirements of s. NR 716.13 (14).
NR 724.13(2)(f) (f) A location map that includes the locations and extent of features that need to be maintained, as well as the extent of contamination.
NR 724.13(2)(g) (g) Final construction specifications on any engineering control feature.
NR 724.13 Note Note: Engineering controls may include a cover, barrier, or vapor mitigation system.
NR 724.13(2)(h) (h) A list of prohibited activities.
NR 724.13(2)(i) (i) A contact for questions on specific actions and the inspection log.
NR 724.13(2)(j) (j) A statement of where more site-specific information may be found.
NR 724.13 Note Note: More site-specific information may be found in the department's files.
NR 724.13(2)(k) (k) For vapor mitigation systems; a diagram and photographs showing piping, venting, fans and manometer locations, vent height and location, a description of how to verify that the vapor mitigation system is operating properly, identification of prohibited activities to ensure the continued effectiveness of the vapor mitigation system, and direction to notify the department before any action is taken which would disturb operation of the vapor mitigation system.
NR 724.13(2)(L) (L) Air emission reporting and permitting, as applicable.
NR 724.13(2)(m) (m) Monthly manometer checks.
NR 724.13(2)(n) (n) Annual inspection of system parts.
NR 724.13(3) (3) Progress reports. In addition to the general progress reporting requirements in s. NR 700.11, responsible parties shall submit semi-annual operation and maintenance progress reports to the department. Progress reports shall be sequentially numbered, starting with the first report which is due no later than 6 months after the remediation system begins operation. Information related to operation and maintenance shall be provided on a reporting form supplied by the department. The department may require progress reports be submitted at a different frequency than semi-annually.
NR 724.13 Note Note: Operation and maintenance progress reports should be submitted for both active and passive remediation systems. Progress reports required under this subsection are not the same as post-closure maintenance inspection logs for remedies such as performance standard covers.
NR 724.13 Note Note: Copies of remediation system operation and maintenance reporting forms may be obtained from any regional office of the department, or by writing to the Department of Natural Resources, Bureau for Remediation and Redevelopment, P.O. Box 7921, Madison, Wisconsin 53707, or at http://dnr.wi.gov/files/PDF/forms/4400/4400-194.pdf.
NR 724.13(4) (4)Operation and maintenance plan revisions. When warranted by changes in the design, operation or maintenance of the interim or remedial action, or when requested by the department, responsible parties shall revise the appropriate section of the operation and maintenance plan. Plan revisions shall be submitted to the department and shall:
NR 724.13(4)(a) (a) Include the information required in s. NR 724.05 (2) (e).
NR 724.13(4)(b) (b) Be numbered with a revision number.
NR 724.13(4)(c) (c) Document any changes in the time of anticipated case closure.
NR 724.13(4)(d) (d) Document any changes in the design, operation, maintenance or monitoring of the interim or remedial action.
NR 724.13 History History: Cr. Register, April, 1995, No. 472, eff. 5-1-95; am. (3) (a) 1., 2. and 3., renum. (3) (e) to be (3) (f) and cr. (3) (e), Register, October, 1996, No. 490, eff. 11-1-96; correction in (4) made under s. 13.93 (2m) (b) 1., Stats., Register, October, 1999, No. 526; CR 12-023: am. (1) (a), (b), cr. (1) (c), (d), am. (2) (intro.), (a), (e) 2., cr. (2) (f) to (n), renum. (3) (intro.) to (3) and am., r. (3) (a) to (d), r. (e), (f), am. (4) (title), (c) Register October 2013 No. 694, eff. 11-1-13; correction in (2) (a) made under s. 13.92 (4) (b) 7., Stats., Register October 2013.
NR 724.15 NR 724.15Documentation of construction and completion.
NR 724.15(1)(1) Unless otherwise directed by the department, responsible parties shall submit to the department a construction documentation or as-built report within 60 days after the date that construction of a remedial action or any interim action specified in s. NR 724.02 (1) is completed or determined to be essentially complete by the department.
NR 724.15(2) (2) The report shall document that the completed final remedial or interim action meets or exceeds all design criteria and the plans and specifications developed in accordance with all of the requirements of this chapter.
NR 724.15(3) (3) Unless otherwise directed by the department, the construction documentation report shall include all of the following information:
NR 724.15(3)(a) (a) The information specified under s. NR 724.05 (2) (e).
NR 724.15(3)(b) (b) As-built maps, plan sheets, drawings, isometric drawings and cross sections.
NR 724.15(3)(c) (c) A synopsis of the remedial or interim action and a certification that the design and construction was carried out in accordance with the plans and specifications.
NR 724.15(3)(d) (d) An explanation of any minor changes to the plans and why these were necessary for the project.
NR 724.15(3)(e) (e) Results of all pilot and field tests or studies and site monitoring conducted during construction.
NR 724.15(3)(f) (f) A brief description of the public health and environmental laws applicable to the contamination and the interim or remedial action selected, including the physical location where the environmental laws shall be complied with for all media of concern.
NR 724.15(3)(g) (g) The information required in ch. NR 516 for documenting the construction at the site or facility of any final covers, liners, leachate collection systems and gas collection, extraction and management systems.
NR 724.15(3)(h) (h) A revised operations and maintenance plan in accordance with s. NR 724.13 (4), unless the cover letter indicates that there are no revisions to the operations and maintenance plan.
NR 724.15 History History: Cr. Register, April, 1995, No. 472, eff. 5-1-95.
NR 724.17 NR 724.17Long-term monitoring.
NR 724.17(1) (1)General. Responsible parties shall conduct all necessary and appropriate long-term monitoring at a site or facility in accordance with all of the requirements of this section and any other applicable public health and environmental laws.
NR 724.17(2) (2)Long-term monitoring plan. Unless otherwise directed by the department, the responsible parties shall submit a long-term monitoring plan to the department that specifies:
NR 724.17(2)(a) (a) The parameters to be monitored;
NR 724.17(2)(b) (b) The sampling and analytical methods to be used, consistent with the sampling and analysis requirements in s. NR 716.13;
NR 724.17(2)(c) (c) The interval at which monitoring is to be performed; and
NR 724.17(2)(d) (d) The public health and environmental laws, including standards, to be complied with.
NR 724.17(3m) (3m)Long–term monitoring results. Unless otherwise directed by the department, responsible parties shall submit a monitoring results report to the department after any sampling. Responsible parties shall submit the monitoring results report, including results from private and public wells, within 10 business days of receiving the sample results. Monitoring results shall be submitted in accordance with s. NR 716.14. The report shall include all of the following information:
NR 724.17(3m)(a) (a) The information specified under s. NR 724.05 (2) (e).
NR 724.17(3m)(b) (b) Sampling results.
NR 724.17(3m)(c) (c) Monitoring results in tabular and graph form, including the current monitoring results and all previous results, so as to provide a concise summary of the monitoring program.
NR 724.17 Note Note: Long term monitoring for groundwater includes groundwater table elevation data. This data is used for the system effectiveness reporting required by s. NR 724.13 as well as for the assessment used to determine what attenuation processes are occurring at the site.
NR 724.17 Note Note: Section NR 716.14 requires the submittal of specific monitoring result information in a letter or on a form provided by the department.
NR 724.17(3m)(d) (d) Laboratory analytical reports and sample chain–of–custody forms, unless otherwise directed by the department.
NR 724.17(3m)(e) (e) Identification of any specific environmental standards that have been attained or exceeded and an indication on a site or facility map of the location where the standards have been attained or exceeded.
NR 724.17(3m)(f) (f) A preliminary analysis of the cause and significance of any concentrations that attain or exceed specific environmental standards and any increases in concentrations of substances that previously attained or exceeded specific environmental standards, including the factors specified in s. NR 140.24 (1) (c) 1. to 10. for groundwater.
NR 724.17 Note Note: Section 292.11, Stats., and ch. NR 706 require that the department be notified immediately of any hazardous substance discharge.
Loading...
Loading...
Published under s. 35.93, Stats. Updated on the first day of each month. Entire code is always current. The Register date on each page is the date the chapter was last published.